6-6-1 Small Beer Bottling Filling Machine Small Beer Filling Capping Machine
Working procedure
Can is pushed into can holding platform one by one by feeding screw and star-wheel. After flushing by CO2, centering cup of filling valve will fall to can; the distance between filling valves and cans are sealed by springiness plastic ring. The movement of centering cup is generated by plastic idler wheel along curvilinear motion. After filled, valve will be closed, air is discharged, and centering cup will rise from the can. Filled can will be sent to conveyor chain, then to capper. Seamer will take the lid, turn over the edge of can and turn the edge to finish the sealing action by the control of cam. High pressure foam flushing device is equipped. After that can is transferred to conveying system.
Main features
1) Wholly sealed widow structure which is beautiful, concise, easy and highly operated;
2) Cycling tank design with precision polishing inside;
3) High precision and large flow rate filling valves to meet productive requirement;
4) Specially designed roller structure which is easy to be adjusted, locked and ensure sealing function;
5) Friendly and convenient operating panel with high expansibility.
6) The filling valve is adopts high precision mechanism valve, fast speed filling, high precision liquid level.
7) The filling vat adopts SUS304 or 316L material designed sealing vat, to achieve constant pressure filling.
8) The flow rate of the filling valve>125ml/s.
9) Main transmission adopts toothed belt and gearbox open-type transmission assemblies, high efficiency, low noise.
10) The main drive adopts step-less speed change for frequency conversion, the whole machine adopts PLC control; the capping machine and filling machine adopt coupling joint, to ensure synchronization of two machines.
11) With filling with can, no filling without can.
12) The filling manner is constant pressure filling, with fast filling speed and stable action.
1.Compact structured, good-looking, easy to operate and highly automated.
2.Parts with contact with material are all made of stainless steel of food-grade, no dead angles and easy to clean up.
3.Filling volume is controlled with film valves to ensure accurate filling. 4.Liquid buffer element specially designed inside filling valves can eliminate the cutting affection and wallop between liquid and container, easy to eliminate the air bubble in material.
5.Equipped with overload system to safeguard machine and operators.
6.Equipped with cap absence detector and bottle jam-up detector, which could stop the monoblock in that case.
7.Equipped with output calculating function for monoblock.
8.Main electronic components (touch screen, PLC and frequency inverter) are imported products.
Blowing Filling Capping Combiblock
Drinking Water Filling Machine
3.Technical parameter
| Model: | GF-8 | GF-12 | GF-18 | GF-24 | GF-32 |
| capacity (330ml based) | 2000BPH | 2600BPH | 5000BPH | 8000BPH | 12000BPH |
| Suitable bottle : | Can, aluminum can, iron can and so on |
| Machine size:(mm) | 800*800*2200 | 980*900*2350 | 1000*1200*2400 | 1500*1500*2500 | 1800*2000*2600 |
| weight: (kg) | 1200 | 1500 | 1800 | 2500 | 3200 |
About Us:
Jiangsu Zhongyin Machinery Co., LTD. is located in Donglai Town, Zhangjiagang City, Jiangsu Province. It has international
standard workshop more than 15000 square meters. It is one of the professional beverage packaging machinery manufacturers withcollecting research, development and manufacturing. It is China's best beverage machinery equipment suppliers. As liquid packaging industry enterprise, the drink service network is all over the world more than 30 countries and regions, products are widely used in drinks, flavor, cosmetic, beer, milk, and pharmaceutical industries.
Since company has begun, focused on the professional technology --- beverage packaging machinery, to forge leading beverage packaging machinery, upstream and downstream related both beverage packaging equipment research and development. Always adhere to technological innovation to drive the company development. It has been applied for patents, has formed a unique market with competitive advantage. In order to make our equipment performance better and more stable of operation, our company cooperates with domestic professional institutes, colleges and universities to carry out the combination of the filling machine and optimized the related equipment design, especially with Shanghai jiaotong university school of mechanical engineering. Using Shanghai jiaotong university, wuxi institute of food engineering technology and other universities’ strong technology research and development strength, to analyze the foreign advanced technology, digestion on the basis of absorbing foreign advanced technology, to change our original design perfectly, and achieved good results.
FAQ:
Q1: Are you manufacturer? A1: Yes, we have the international standard workshop more than 150,000 square meters; besides, we are very professional manufacturer in beverage filling and packing machine field more than 10 years. Q2: Do you have reference project? A2: We have reference project in most countries, if we get the permission of our customer who has brought the machines from us, we can send you their contact imformation, you can go to vist their factory. Besides, you are always welcome to come to visit our factory, and see the machines running at our factory. Besides, when you come, we can pick you up from the station near our city.
Q3: Do you have agent and after-service stations? A3: We are looking for more overseas agents, welcome to join us!
Q4: Do you provide customized service? A4: We can design the machines according your requirements(material , power , filling type , the kinds of the bottles , and so on) , at the same time we will provide you our professional suggestion, as you know, we have been in this industry more than 10 years.
Q5: What's your guarantee or the warranty of the quality if we buy your machines? A5: We offer you high quality machines with 1 year guarantee and supply life-long technical support.
Q6: How long time for installation?
A6: This depends on your machines order, normally, our company will dispatch one or two engineers to customers factory, it will take about 10 days to 25 days.
Q7: What information you need before sending the price quotation? A7: 1. What kind beverage you want to produce? Drinking water? Soft drink? Hot drink? Aseptic drink? Beer? Milk? etc.? 2. Bottle and cap material? Plastic bottle and plastic screw cap? Glass bottle with metal crown cap? Can? 3. Bottle volume? 250ml, 330ml, 500ml, 750ml, 1L, 2L, etc.? 4. Producing capacity you need? How many bottles per hour?
Product Tags:
|
|
6-6-1 Monoblock 330ml Automatic Beer Canning Machine Images
|
